Hosted by site sponsor WebMate.
eMac Q&A - Revised April 16, 2008
To be notified of new Q&As, sign up for EveryMac.com's bimonthly email list.
How do I network the eMac to another Mac?
There are several ways to network the eMac to another Mac.
Wirelessly (AirPort/AirPort Extreme)
Two AirPort (802.11b) or AirPort Extreme (802.11b/g) equipped eMac models or one compatible and equipped eMac and another AirPort or AirPort Extreme-equipped Macintosh, can be networked together without the AirPort hardware access point by using "direct computer-to-computer communications" within a range of approximately 50 meters.
AirPort or AirPort Extreme was optional for all eMac systems. The "Original" eMac G4/700 and G4/800 support AirPort, but did not have it installed by default, and all later eMac models support AirPort Extreme, but also did not have it installed by default.
For Macs that have 10Base-T or 10/100Base-T or faster Ethernet installed and are capable of running MacOS 8.6 or higher, the first Mac can be added to an AirPort network via a crossover Ethernet cable between the computer and the hardware access point and the eMac can be added to the same network by the wireless AirPort Extreme connection if AirPort Extreme is installed.
Wired (Ethernet)
If you're not interested in using wireless networking, or your eMac does not have AirPort or AirPort Extreme installed, an eMac also can be connected with a standard Ethernet cable to many other recent models.
For older systems, assuming that Ethernet is installed, you can just use a simple crossover cable, or Ethernet cables and a hub, to connect another Mac to the eMac. Although it has not been updated in quite some time, Three Macs & A Printer covers basic types of wired networking in-depth.
Firewire
The eMac can also be connected to another FireWire-equipped Mac, by using "FireWire Target Disk Mode". In this mode, the other computer simply will appear as a second hard drive on the desktop of the eMac. According to Apple "to use Target Disk Mode, simply connect the computers using a FireWire cable, then start the second computer while holding down the 'T' key on its keyboard."
For additional information, please refer to "How to Use Firewire Target Disk Mode".
Permalink | Report an Error/Typo | Sign Up for Site Update Notices
Established in 1996, EveryMac.com has been created by experts with decades of experience with Apple hardware. EveryMac.com includes, and always has included, original research incorporating detailed, hands-on inspection of packaging, computers, and devices as well as extensive real-world use. All information is provided in good faith, but no website or person is perfect. Accordingly, EveryMac.com is provided "as is" without warranty of any kind whatsoever. EveryMac.com, and the authors thereof, shall not be held responsible or liable, under any circumstances, for any damages resulting from the use or inability to use the information within. For complete disclaimer and copyright information please read and understand the Terms of Use and the Privacy Policy before using EveryMac.com. Copying, scraping, or use of any content without expressed permission is not allowed, although links to any page are welcomed and appreciated.